Wednesday, January 22, 2014

DIY Gooseneck Webbing Stretcher

I like to save money where I can.  I'm focusing more on upholstery these days and one of the necessary tools you'll need if you're going to be rebuilding furniture is a webbing stretcher.  There are different versions of this tool, but the most user-friendly version looks like this:

This is a gooseneck webbing stretcher by CS Osborne & Co, the muckity mucks of upholstery.  And while this version even bears my maiden name (can you see it?), I just couldn't part with the $40 - $60 it was going to cost me to order one of these online. 


I found a version like this at a local Fabricland for $37, but still....I couldn't justify it and I felt like there had to be a better way! 

Usually searching online for DIY or 'make your own' versions of things yields lots of options, but in this case, not so much.  It took a couple of searches before I found this eHow article on How to Make A Webbing Stretcher which was somewhat helpful, but devoid of pictures. 


Then I came across this weird french anime DIY blog which had a couple of pictures.  There was also another foreign language site with a couple of other pictures, but I cannot for the life of me find it to share with you now. 

So, with a little scrap wood, some nails and screws I had on hand, and an old paint roller, I came up with this:


Not too shabby, right?  True, it's not going to last forever, it certainly doesn't have the durability of the $60 models above, but this one cost me NOTHING and will serve my purposes for the moment, so I say it's a win! 

Here's what you'll need:

Block of scrap wood approx. 4"x4" (I used pine, it's soft and easy to bang the nails into)
Wood Glue
4d or similar nails
1/2 inch screws
Old paint roller handle
Power Drill & Drill Bit
Rubber, thick material, leather, or foam scrap
Staples
Staple Gun
Awl
Hand chisel & Hammer

I cut my scrap of wood to the dimension I needed with my jigsaw.  I didn't measure it, just guesstimated the size I needed based on the width of my jute webbing. 

Then I used a wire cutter (or tin snips) to cut the heads off of 14 nails.  Maybe wear protective eyewear for this step, those little heads can fly! 

Using my awl, I punched starter holes into the pine block.  I put seven nails in the first row and seven in the back row, but I staggered their placement.  I put a dob of wood glue onto the hole made by the awl before knocking in the headless nails (pointy ends up, headless ends down!).  Yes, the heads get a bit dinged, but you don't need them super-sharp anyway.  With the wood glue they feel very sturdy. 



Then I chose a drill bit that matched the width of my paint roller handle.  I drilled a hole into the wood about an inch and a half from the top of the wood with the nails in it.  Your measurement for where to place the hole could be different, it will depend on how your paint roller handle is shaped.  If you take a look at my first picture, you'll see there's a bend in the handle which sits about 1/2 an inch below the start of the wood...aim for something like this and drill your hole accordingly.   


You're drilling a hold to push the roller-holding part of the paint roller handle into the wood.   I used a small 2 inch roller so that the roller wouldn't extend beyond my wood.  You should, too! 

After drilling the hole, I used a chisel to chip away a divot/groove below the hole.  This is for the arm of the handle - to help it lay flat against the wood. 

I filled the hole with wood glue and then bashed my roller handle into the hole and kept bashing the handle until it laid mostly flat into the groove. 

Then I placed 5, 1/2 inch screws into the wood to add extra holding power to the handle.  Larger head screws would be ideal here, but I just used what I had on hand. 

The final step was adding my protective piece of rubber (I actually used a strip from an old non-slip, foam type mat) to the top of the wood.  I'd say you need about a 3"-31/2" long  by 2 1/2" wide piece of rubber or thick material or leather for this.  You want to use this to pad the top of the stretcher because this is the part of the stretcher that comes in contact with the frame of the furniture piece you are upholstering, and you don't want to mark the frame (especially if it is a visible, outer part of the frame!).   The foam I used isn't what I'd recommend, I'd recommend rubber if you can find it, but again, this is what I had on hand and can be replaced. 

I centred the foam and then stapled it down with my staple gun.  Et voila!  A free, make your own webbing stretcher! 


She ain't pretty, but she can help you do this:


Success! 

And in case you're wondering, care of my new idol (and girl crush!), Amanda Brown of Spruce Upholstery in Austin, Texas this is how you use a gooseneck webbing stretcher:


And if you've dabble a bit in DIY upholstery and are looking for more info, teaching and lots of awesome pictures, I highly recommend Amanda's book, Spruce: A Step By Step Guide to Upholstery and Design

Happy stretching! 

6 comments:

  1. Brilliant, cavewoman, make-do-and-mend resourcefulness!

    ReplyDelete
  2. Love your webbing stretcher! I am reupholstering a chair using Amanda Brown's,"Spruce" as we speak! Which is what brought me here... I just bought the first version you showed today for about $12.00, I had a coupon. But as I lay here reading "Spruce" to plan my next step in the process, I see this ingenious goose neck stretcher.... It won't be mine. Unless I make one like you did, and I will! Thanks!

    ReplyDelete
  3. I just posted a reply to Magleedia's post re the webbing stretcher, but without looking at the stretcher, so had wrong picture in my mind! The spikes are alongside the handle of course, but the block of wood I salvaged from my shed was about 4 1/2" wide, so I used that as the length, while the handle was inserted only 1 " up, causing a loss of some 3" of webbing each time. I can see how short the commercial stretcher used in the photo (courtesy Amanda Brown) was. Note to me: stick to the instructions!

    ReplyDelete
  4. I'm fascinated that this is getting attention now. :) Hope it's been helpful. Good luck with your projects!!

    ReplyDelete
  5. I am hoping there is any way to do this with a already made tool , I am in a pinch and can't really make one, and there is no where around me to buy one and online would take time to ship, any ideas or thoughts would be great, I'm attempting upholstering for the first timne on a jenny lind love seat i got in rough shape, thank you

    ReplyDelete
  6. Creating your own DIY gooseneck webbing stretcher can be a practical and cost-effective solution for upholstery projects. By following a tutorial or guide, you can customize the stretcher to suit your needs and save money compared to purchasing a pre-made tool. DIY projects like this can be rewarding and allow for more creativity in your upholstery work. Consider making your own gooseneck webbing stretcher for your next upholstery project! Webbing






    ReplyDelete